PACKAGE OF PRACTICES OF PEAS
HOME | PACKAGE OF PRACTICES OF PEAS
PACKAGE OF PRACTICES OF PEAS
ENGLISH
Climate and Soil
Pea is a cool weather loving plant. It can germinate even at 4-5 degree C and can tolerate frost. However, under severe continuous frost, its flowers and young pods are likely to be damaged. Optimum germination takes place at 20-250C. At temperature of 30 degree C and above, the germinating or emerging seedlings get killed. The high temperature conditions prevaliling at the time of planting results in the build up of wilt and stem fly complex which results in considerable losses in yield. Hence pea attain an ideal growth and development in areas where there is a slow transition from cool to warm weather. It can be grown on all types of soils but well drained fertile loamy soils are best for the crop. Peas do best in soils having pH 6.0 to 7.5.
Agronomic Practices
Sowing and Seed Rate : Since the incidence of wilt in September is very high, some what late sowing from mid-October to mid-November give the best crop in the plains. Seed rate is 45 kg for early maturing varieties and 30 kg for main season varieties per acre. Line×Plant spacing should be 30×7.5 cm for early and 30×10 cm for main season varieties. The sowing of pea can also be done with Seed-cum- Fertilizer pea drill on ridges which are 60 cm wide. This drill sows two rows of pea which are 25 cm apart on each ridge. This drill can sow one acre per hour.
Inoculation : In areas where pea crop has not been sown earlier, it is advisable to treat the seed with bacterial culture (Rhizobium leguminosarum) to ensure nodule formation and quick growth. It increases the yield and quality of pods. The culture is available in the Department of Microbiology, Punjab Agricultural University, Ludhiana. One acre culture packet should be mixed with half litre of water. Rub the mixture thoroughly on seed to give a fine covering of the culture to every seed. Thereafter, spread the seed in shade for drying and sow it immediately afterwards.
Manures and Fertilizers : Apply 8 tonnes of farmyard manure, 20 kg of N (45 kg Urea) and 25 kg P2O5 (155 kg Superphosphate) per acre before sowing.
Weed Control : The field should be kept free from weeds by giving two hoeings after four and eight weeks of germination respectively. For chemical weed control use Stomp 30 EC (pendimethalin) @1.0 litre per acre within 2 days of sowing. Dissolve the herbicide in 150-200 litres of water and spray uniformly over the entire field. Application of this herbicide control many of the annual broad leaved and grass weeds, including guli danda (Phalaris minor).
Irrigation :
1. Furrow Irrigation : Seed should be sown in proper soil moisture condition. First irrigation should be given after 15 days of sowing. Next irrigation should be given at flowering and then at fruit set if necessary. Pea can be grown as rainfed crop with limited irrigations. The total number of irrigations required are 3-4 depending upon the soil type and weather conditions.
2. Drip irrigation : Drip irrigation in pea not only increases the yield but also saves 30% water as compared to conventional method of irrigation. For drip irrigation, sow two rows of pea at 25 cm row to row distance on 60 cm wide bed. Under this system, irrigation should be applied at an interval of 3 days. Do not apply irrigation before 15 days of sowing and before 10 days of harvesting of crop. The crop should be irrigated with one lateral pipe per bed and keep distance lateral and dripper to dripper 30 cm having discharge of 2.2 litres per hour as per the following schedule:
| Month |
Time of irrigation (minutes)
|
| November |
15
|
| December |
15
|
| January |
20
|
| February | 25 |
If discharge rate is less than 2.2 litres per hour, time of
irrigation may be adjusted proportionally by the formula
2.2 × Time of irrigation (minute)
= ——————————————–
Discharge of dripper (litre/hour)
Fertigation: Apply 33 kg and 42 kg Mono Ammonium Phosphate per acre. The 20% of the fertilizer should be applied during the first month after germination in 5 split doses. The remaining amount of fertilizer should be applied in nine equal doses during the second month. Fertigation saves 20% fertilizer. 3. Sub-surface drip irrigation and fertigation: InKharif maize – peas-spring maize cropping system, pea can be irrigated through sub-surface drip irrigation system. Install drip inlines
having emitter spacing of 30 cm at 20 cm depth keeping lateral to lateral spacing of 60 cm. One drip lateral will serve two rows of peas. Useonly 80% of the recommended dose of nutrients. Irrigate pea at 3 days interval. Apply 1/5 dose of N and P at sowing as basal and fertigate the remaining N and P in 9 splits at 6 days interval starting from 25 DAS. Use SSP fertilizer for basal application of P.If emitter discharge is 2.2 litre per hour, the following schedule should be adopted:
If discharge rate is different, then time of irrigation may be adjusted proportionally by the formula
|
Month
|
Time of irrigation (Minutes)*
|
|
October |
20 |
|
November |
25
|
|
December |
25
|
|
January |
30 |
If discharge rate is di昀昀erent, then time of irrigation may be
adjusted proportionally by the formula
= (2.2 x time of irrigation (min)*) ÷ Discharge of dripper (litre
per hour)
Harvesting, Care and Marketing: Harvest the crop at the proper edible maturity and do not allow the pods to over mature which impairs its quality. Harvesting is to
be completed in number of pickings depending upon the maturity group of peas.
हिन्दी
मौसम और मिट्टी
मटर ठंडे मौसम को पसंद करने वाला पौधा है। यह 4-5 डिग्री C पर भी उग सकता है और पाला सह सकता है। हालांकि, लगातार बहुत ज़्यादा पाला पड़ने पर इसके फूल और नई फलियों को नुकसान होने का खतरा रहता है। सबसे अच्छा अंकुरण 20-250C पर होता है। 30 डिग्री C और उससे ज़्यादा तापमान पर, उगने वाले या उभरते हुए पौधे मर जाते हैं। बोने के समय ज़्यादा तापमान होने की वजह से विल्ट और स्टेम फ्लाई कॉम्प्लेक्स बन जाता है, जिससे पैदावार में काफी नुकसान होता है। इसलिए मटर उन जगहों पर अच्छी ग्रोथ और डेवलपमेंट करता है जहां मौसम धीरे-धीरे ठंडे से गर्म होता है। इसे सभी तरह की मिट्टी में उगाया जा सकता है, लेकिन अच्छी ड्रेनेज वाली उपजाऊ दोमट मिट्टी फसल के लिए सबसे अच्छी होती है। मटर pH 6.0 से 7.5 वाली मिट्टी में सबसे अच्छा होता है।
खेती के तरीके
बुवाई और बीज की मात्रा: चूंकि सितंबर में विल्ट का खतरा बहुत ज़्यादा होता है, इसलिए मैदानी इलाकों में अक्टूबर के बीच से नवंबर के बीच तक थोड़ी देर से बुआई करने पर सबसे अच्छी फसल मिलती है। जल्दी पकने वाली किस्मों के लिए बीज की दर 45 kg और मुख्य मौसम की किस्मों के लिए 30 kg प्रति एकड़ है। जल्दी पकने वाली किस्मों के लिए लाइन×पौधे की दूरी 30×7.5 cm और मुख्य मौसम की किस्मों के लिए 30×10 cm होनी चाहिए। मटर की बुवाई 60 cm चौड़ी मेड़ों पर सीड-कम-फर्टिलाइजर मटर ड्रिल से भी की जा सकती है। यह ड्रिल मटर की दो लाइनें बोती है जो हर मेड़ पर 25 cm की दूरी पर होती हैं। यह ड्रिल एक घंटे में एक एकड़ में बुवाई कर सकती है।
टीकाकरण: जिन इलाकों में मटर की फसल पहले नहीं बोई गई है, वहां गांठें बनने और जल्दी बढ़ने के लिए बीज को बैक्टीरियल कल्चर (राइजोबियम लेग्यूमिनोसारम) से उपचारित करने की सलाह दी जाती है। इससे फली की पैदावार और क्वालिटी बढ़ती है। यह कल्चर पंजाब एग्रीकल्चरल यूनिवर्सिटी, लुधियाना के माइक्रोबायोलॉजी डिपार्टमेंट में मिलता है। एक एकड़ कल्चर पैकेट को आधा लीटर पानी में मिलाना चाहिए। इस मिक्सचर को बीज पर अच्छी तरह रगड़ें ताकि हर बीज पर कल्चर की अच्छी परत चढ़ जाए। इसके बाद, बीज को छाया में सूखने के लिए फैला दें और तुरंत बाद बो दें।
खाद और फर्टिलाइजर: बोने से पहले 8 टन गोबर की खाद, 20 kg N (45 kg यूरिया) और 25 kg P2O5 (155 kg सुपरफॉस्फेट) प्रति एकड़ डालें।
खरपतवार कंट्रोल: खेत को उगने के चार और आठ हफ़्ते बाद दो गुड़ाई करके खरपतवार से मुक्त रखना चाहिए। केमिकल खरपतवार कंट्रोल के लिए बोने के 2 दिन के अंदर स्टॉम्प 30 EC (पेंडिमेथालिन) @1.0 लीटर प्रति एकड़ इस्तेमाल करें। हर्बिसाइड को 150-200 लीटर पानी में घोलकर पूरे खेत में एक जैसा स्प्रे करें। इस हर्बिसाइड के इस्तेमाल से गुली डंडा (फैलारिस माइनर) सहित कई सालाना चौड़ी पत्ती वाले और घास वाले खरपतवार कंट्रोल होते हैं।
सिंचाई:
1. फरो सिंचाई: बीज को मिट्टी में सही नमी की स्थिति में बोना चाहिए। पहली सिंचाई बुआई के 15 दिन बाद करनी चाहिए। अगली सिंचाई फूल आने पर और फिर ज़रूरत पड़ने पर फल लगने पर करनी चाहिए। मटर को बारिश पर निर्भर फसल के तौर पर कम सिंचाई के साथ उगाया जा सकता है। मिट्टी के टाइप और मौसम के हिसाब से कुल 3-4 सिंचाई की ज़रूरत होती है।
2. ड्रिप सिंचाई: मटर में ड्रिप सिंचाई से न सिर्फ़ पैदावार बढ़ती है, बल्कि सिंचाई के पुराने तरीके के मुकाबले 30% पानी भी बचता है। ड्रिप सिंचाई के लिए, 60 cm चौड़ी क्यारी पर मटर की दो लाइनें 25 cm लाइन से लाइन की दूरी पर बोएं। इस सिस्टम में, 3 दिन के गैप पर सिंचाई करनी चाहिए। बुआई के 15 दिन पहले और फसल की कटाई के 10 दिन पहले सिंचाई न करें। फसल को हर क्यारी पर एक लैटरल पाइप से सिंचाई करनी चाहिए और लैटरल और ड्रिपर से ड्रिपर की दूरी 30 cm रखनी चाहिए, जिसमें नीचे दिए गए शेड्यूल के हिसाब से 2.2 लीटर प्रति घंटा डिस्चार्ज हो:
| Month |
Time of irrigation (minutes)
|
| November |
15
|
| December |
15
|
| January |
20
|
| February | 25 |
If discharge rate is less than 2.2 litres per hour, time of
irrigation may be adjusted proportionally by the formula
2.2 × Time of irrigation (minute)
= ——————————————–
Discharge of dripper (litre/hour)
फर्टिगेशन: हर एकड़ में 33 kg और 42 kg मोनो अमोनियम फॉस्फेट डालें। 20% फर्टिलाइज़र अंकुरण के बाद पहले महीने में 5 अलग-अलग डोज़ में डालना चाहिए। बाकी फर्टिलाइज़र दूसरे महीने में नौ बराबर डोज़ में डालना चाहिए। फर्टिगेशन से 20% फर्टिलाइज़र बचता है। 3. सब-सरफेस ड्रिप इरिगेशन और फर्टिगेशन: खरीफ मक्का – मटर-स्प्रिंग मक्का क्रॉपिंग सिस्टम में, मटर की सिंचाई सब-सरफेस ड्रिप इरिगेशन सिस्टम से की जा सकती है। ड्रिप इनलाइन लगाएं
जिनमें एमिटर स्पेसिंग 30 cm हो और 20 cm गहराई पर 60 cm की लैटरल से लैटरल स्पेसिंग हो। एक ड्रिप लैटरल मटर की दो लाइनों के लिए काफी होगी। न्यूट्रिएंट्स की बताई गई डोज़ का सिर्फ़ 80% इस्तेमाल करें। मटर की सिंचाई 3 दिन के गैप पर करें। N और P की 1/5 डोज़ बुवाई के समय बेसल के तौर पर डालें और बाकी N और P को 25 DAS से शुरू करके 6 दिन के गैप पर 9 बार में फर्टिगेट करें। P के बेसल इस्तेमाल के लिए SSP फर्टिलाइज़र का इस्तेमाल करें। अगर एमिटर डिस्चार्ज 2.2 लीटर प्रति घंटा है, तो यह शेड्यूल अपनाना चाहिए:
|
Month
|
Time of irrigation (Minutes)*
|
|
October |
20 |
|
November |
25
|
|
December |
25
|
|
January |
30 |
If discharge rate is di昀昀erent, then time of irrigation may be
adjusted proportionally by the formula
= (2.2 x time of irrigation (min)*) ÷ Discharge of dripper (litre
per hour)
अगर डिस्चार्ज रेट अलग है, तो सिंचाई का समय इस फ़ॉर्मूले से उसी हिसाब से एडजस्ट किया जा सकता है।
कटाई, देखभाल और मार्केटिंग: फसल को सही खाने लायक मैच्योरिटी पर काटें और फलियों को ज़्यादा पकने न दें जिससे उसकी क्वालिटी खराब हो जाती है। मटर के मैच्योरिटी ग्रुप के आधार पर कटाई कई बार करनी है।
DISCLAIMER
Description and illustrations appearing on this pouch represent our product as is our trails. Appearance and performance may vary in other geographic locations and different growing conditions. The seeds in this pouch should be sown or planted as per the prescribed guidelines/ advice of the concerned regional farmer’s advisory body. In case of breach of any of the terms the producers/ dealer/ Supplier shall not be held liable.